Which SSD Should I Choose for Gaming

How do you choose the right SSD for gaming? A few years ago, this would have been an easy question to answer. If you wanted the best performance possible, you would have purchased an SSD based on the SATA interface, like this Crucial MX300 500GB SATA SSD. Today, though, there are faster options available—specifically, drives that use either the PCI Express (PCIe) or non-volatile memory express (NVMe) interface instead of SATA. This means 1TB NVMe PCIe SSD offers high speed than those of traditional solid-state drives.

Choosing an SSD for gaming

We’ve already covered how NAND works, but in the benchmarks of online casinos new zealand, we discovered that there is a key difference between drives when it comes to gaming. The biggest performance gain comes when moving from SATA III to NVMe, and most gamers will find that an upgrade to NVMe will provide the greatest boost. For example, you can see that in our 64GB Windows boot test on 2TB drives (the right-most bar), NVMe ends up being over twice as fast as SATA3. The speed gains don’t stop there: Even at just 1/8th of total drive capacity (16GB) an NVMe drive is still almost twice as fast as its SATA III equivalent.

Choosing between a hard drive and an SSD

While there’s no hard and fast rule on which is better, there are a few factors you should consider when choosing between an SSD and a hard drive. Capacity is one important thing to think about; larger-capacity drives offer lower cost per gigabyte than smaller ones, making them a better choice if you want to store lots of data. For example, 500GB or 1TB hard drives can be purchased for as little as $0.05 per gigabyte while 250GB or 128GB M.2 NVMe drives can cost upwards of $0.75 per gigabyte—that means an M.2 drive could be eight times more expensive than an equivalently sized HDD!

Choosing between NVMe and SATA

To start, there are two kinds of drives. The first is a hard drive. This is a magnetic disk that stores data by magnetizing areas on rotating platters. Second, there is an SSD or solid state drive. Unlike hard drives, these drives have no moving parts and use semiconductor memory to store information.

Choosing a M.2 SSD

Performance — When shopping for an M.2 drive, your first priority should be performance. After all, you’re looking to speed up your PC, and even a couple seconds can mean a lot when you’re swapping back and forth between apps.

Choosing Between PCIe 3.0 x4, x2, x1 (Gen3) & Gen2

Knowing which PCIe version to go with is crucial in maximizing your gaming rig’s performance. As a general rule, if you have money to spend on a faster CPU as well as top online casinos, you should also get an SSD that supports PCIe 3.0 x4 (aka Gen3). The performance boost will be minimal—the NVMe specification doesn’t seem to push hard enough to warrant an upgrade in and of itself—but every little bit helps when playing highly intensive games. You can find our list of recommended drives here.

Choosing Between Read/Write Speeds

The three main aspects to look at when considering an SSD are: capacity, read/write speeds and cost.

How Much Storage Do You Need?

Solid-state drives are unquestionably faster than hard drives, and they’re also more reliable. That said, you don’t necessarily need a top-of-the-line storage device to load up your favorite games or stream movies.

Back to top button
casino online judi slot agen slot slot online situs slot slot terbaru judi bola daftar slot bandar togel poker idn slots online link slot judi slot agen idn idn poker agen bola poker online link bola agen togel situs judi togel terpercaya slot gacor judi togel bandar slot slots gacor judi poker deposit slot togel online situs togel togel terbaik togel macau bonus slot togel slot togel resmi togel pulsa bo togel togel 100perak togel 4d toto online togel jackpot togel hongkong togel singapore jackpot slot slot terbaik slot jackpot slot pragmatic jackpot terbesar judi slot Bandar togel