Your concrete driveway may need resurfacing or Atlanta Driveway Replacement for several reasons. Some of these include weather-related damages, cracks, and potholes. If you have a natural stone driveway, repairing cracks is as easy as replacing the pavers. On the other hand, a concrete driveway may need resurfacing or resealing to avoid further damage. Read on to learn more about your options.
Repairing small cracks
There are a number of DIY projects you can perform to repair small cracks in your concrete Driveway Replacement Atlanta. These cracks are often the result of shrinking in the concrete as it dries. In most cases, they aren’t indicative of a larger problem, but they can be unsightly and potentially cause a leak or worse. In such cases, you should consider using a crack sealant like Quikrete’s Advanced Polymer Concrete Crack Sealant.
Before beginning your project, you should thoroughly clean the cracks and any loose debris. A shop vac or air compressor will also help you clean the area. After cleaning the crack, you should apply textured caulk or pourable concrete grout to seal the area. The concrete sealer or textured caulk should be able to give with earth movement. Read labels carefully to determine which product is best for the job. You should follow manufacturer’s instructions closely when applying the material to the crack. Once you’ve finished, you should wipe the surface with a wire brush to remove any debris left behind.
Resurfacing a concrete driveway
Resurfacing a concrete driveway in need of repair is a cost-effective alternative to replacing the entire surface. The process involves replacing the top layer of the driveway with a new, fresh one. The benefits of resurfacing a concrete driveway are numerous. They provide a new look and feel while being less costly than tearing up the entire driveway. While resurfacing is more common for asphalt driveways, it can be successfully performed on Concrete Pouring driveways as well.
Although concrete is generally a sturdy material, if it does not receive regular maintenance, it can quickly deteriorate. Cracks, potholes, and holes can form in concrete surfaces, making them unsafe and unsightly. A new surface is needed to repair these problems. If you are unsure about whether you should resurface or replace your concrete driveway, follow these tips. Listed below are the pros and cons of each type of resurfacing process.
If you have a concrete driveway, chances are you have already noticed the dreaded potholes. They happen when water penetrates the pavement through small cracks. This water then freezes and expands, which breaks up the asphalt. Over time, cars drive over the soft area, making it worse. To prevent potholes from forming, stop the water from getting in. Follow these tips for preventing potholes in Concrete Companies Atlanta driveways.
If you notice cracks in your driveway, don’t ignore them. They allow water to seep through and cause problems. The water can erode the gravel fill underneath, causing holes and uneven sections in the asphalt. If left untreated, this can lead to a large hole. Pothole repair requires extensive preparation. A professional can help you choose the best method for your driveway’s repairs. A quality surface sealant can help prevent a problem from becoming worse.
Weather-related causes of cracks
One of the most common causes of cracks in a concrete driveway is weather-related. The concrete itself is subject to cycles of expansion and contraction. The water that accumulates in these areas deteriorates the concrete and weakens the support underneath. Adding to this, traffic will also wear down the surface. An uneven driveway will not only look unsightly, but also become a tripping hazard.
The temperature of the ground will affect the strength of the concrete. A colder climate can cause water to freeze on the concrete, resulting in a large increase in pressure. Repeated freezing and thawing processes will increase moisture levels, leading to cracks. Salts used by cement finishers can also damage the concrete because they have a higher tendency to attract moisture. This can lead to an uneven surface and even larger cracks.