How to change the water filter in a refrigerator

Although ice and water dispensers in refrigerators are a tremendous convenience, the additional system can also entail more maintenance because filters need to be cleaned frequently.

Dispensers should constantly generate clean water and ice, and to maintain the quality of the water supply, they often use one or more water filters. The water filter needs to be changed frequently because of this, and fortunately, you can do it yourself.

Know your resources.

Regardless of the kind of refrigerator water filter you have, you should typically replace it every two years, especially if you frequently use water and ice dispensers.

In addition to routine maintenance, it is advisable to change the filter if you find that the ice or water quality has changed. Always refer to your user manual.

Knowing the type of fisher paykel fridge water filter is crucial when changing it. There are push-on and screw-on types of refrigerator filters.

The screw-in style is frequently seen in the front, inside, or next to the bottom, behind the lower grille. The push filter is typically found in the cooling compartment at the top of the refrigerator, in a drawer inside the refrigerator, or behind the bottom grille.

Take the filter you removed to the neighborhood hardware or home improvement store to find a replacement. A salesperson or advisor will suggest a suitable replacement filter after seeing the filter. Since water filters might not have an expiration date, it might be prudent to purchase many at once in order to avoid making a separate trip.

For your refrigerator water filter, certain companies, like Everydrop, provide a subscription service and will send you a new one at predetermined intervals. Subscription programs frequently work on a subscription and savings basis and can help you save money on the purchase of individual filters in addition to relieving you of the responsibility of remembering when to order and change filters.

Steps for Replacing the Refrigerator Water Filter

But before you start, you should spend some time getting acquainted with certain crucial information. The use and care instructions that come with your appliance or product should be your primary source of information, so always read them before you start using it.

  1. Disconnect the refrigerator’s power source.

You might need to cut off the refrigerator’s power depending on the filter and refrigerator you have.

Given that it is a water system in electrical equipment, this is a crucial safety precaution. The majority of the time, you won’t need to change the water supply, but it’s advisable to get assistance from the guide.

It could be essential to turn off the water supply if your refrigerator is an older model or a specific type.

  1. Find the filter as previously mentioned.

The location will also provide you with a suggestion if you’re not sure what kind of filter you’re using. The user manual or the product specification is likely to contain information on the filter type.

  1. Discard the previous filter.

The kind of filter will determine the best way to achieve this. For a spin-on filter, you often need to turn it counterclockwise until it comes loose, then remove it from the refrigerator. For the push type, you must push the release button to release the filter before removing it. You could also need to push the filter down to release it if there isn’t a button. Consult the production installation instructions or the user manual.


  1. Eliminate water spills.

Many contemporary refrigerators come with mechanisms that immediately halt the water flow when the filter is removed. Hold the filter upright throughout the operation, though, to prevent overflowing, and keep a towel nearby just in case. It’s recommended to keep a shallow container nearby in case you notice that more water leaks out than you expected.

  1. Take off the new filter’s dust cap.

Install the dust cap from the old filter in its place after you have the new one. If the cap is damaged in any way during this procedure, the filter could not work properly. You might need to add water to the new water filter, depending on the make and type of filter. If it’s necessary, it might be stated in the installation instructions or on the packing.

  1. Put in the fresh filter.

Install the new filter in the same location as the previous one. Typically, when using a spin-on filter, make sure it is upright, insert it into the opening, and rotate it in a clockwise direction.

Be careful not to overtighten the filter because you might feel and hear a click. For a push filter, all you need to do is insert it after properly aligning it.

The button should display if the filter was installed properly. Regardless of the filter type, this step ought to go without a hitch. Consult the production installation instructions or the user manual.

  1. Use water to rinse the new filter.

Ensure that the newly installed filter receives enough water. This will help you remove any factory contaminants and assess how well the filter is performing.

In the absence of leaks, you can also check to determine if the new water filter was put in correctly. Manufacturers frequently advise first passing two to four liters of water through the filter.

  1. Note the date of filter replacement.

Check to determine if your refrigerator has a water filter indicator if the sort of filter you are replacing does not have a label indicating when it needs to be replaced again. If there isn’t, make a note of the alternative date or mark it on your calendar to make sure you don’t miss the subsequent service. You may add it to the calendar on your phone or set an alarm to remind you.

  1. Reset the water filter indication on the refrigerator (if equipped).

Finally, if the refrigerator has an indication, make sure you reset it. Some refrigerators will handle this on their own, or you might have to issue a specific order.

Consult the user manual for instructions specific to the make and model of your refrigerator. Don’t skip this step if your fridge has a electrolux fridge water filter indicator; it’s the greatest way to make sure your fridge is operating as efficiently as possible.

Safe water is pure water.

Your refrigerator’s water and ice dispenser could appear to be a recent installation. After all, keeping your food and beverages cold, fresh, and undamaged is the primary purpose of household appliances.

However, if you frequently use the dispenser, it’s crucial to keep the water supply it receives clean and secure. This is why it’s important to maintain the water filter on a regular basis.

Make sure you don’t forget to replace the water filter in your refrigerator if you have in the past. The fact that you may occasionally taste the ice and water flowing from your refrigerator ought to be sufficient justification for keeping the system in good working order.

Related Articles

Leave a Reply

Back to top button
casino online judi slot agen slot slot online situs slot slot terbaru judi bola daftar slot bandar togel poker idn slots online link slot judi slot agen idn idn poker agen bola poker online link bola agen togel situs judi togel terpercaya slot gacor judi togel bandar slot slots gacor judi poker deposit slot togel online situs togel togel terbaik togel macau bonus slot togel slot togel resmi togel pulsa bo togel togel 100perak togel 4d toto online togel jackpot togel hongkong togel singapore jackpot slot slot terbaik slot jackpot slot pragmatic jackpot terbesar judi slot Bandar togel