It’s easy to make your home interior stylish with click vinyl flooring. No matter what style you’re looking for, there is a wide variety of patterns and colors available to match any décor. Click vinyl flooring can be installed in an afternoon and gives the room a finished look that will last for years.
Here are the steps to transform your interiors with click vinyl flooring:
1) Remove the furniture from your floor and cover any carpeting with a drop cloth.
Re-arrange the room to make it easier for you to work in, such as pushing all of the furniture against one wall or rearranging them into an open layout instead of having closed-off rooms.
2) Clean the floor thoroughly with a damp mop or vacuum.
This will help in measuring for your new click vinyl flooring and also ensure that it lays flat on the surface.
You may want to go over this step twice, as some dust particles can be difficult to remove from deep cracks between boards and other tight spaces.
3) Measure your floor.
Measure the width of each plank and the perimeter and room to get an idea of how much vinyl you will need for installation. You’ll want to measure from wall to wall in some cases, while other times, it may be best to measure a specific area like around a bed or table. It’s important to measure as accurately as possible because it will help you create a flooring layout that is aesthetically pleasing.
This will help measure your new click vinyl flooring and ensure that it lays flat on the surface. You may want to go over this step twice, as some dust particles can be difficult to remove from deep cracks between boards and other tight spaces.
4) Mark the measurements.
Use a pencil to mark your floor planks, just like you would with any other type of flooring installation. This will ensure that it lays flat and is aligned as accurately as possible for an aesthetically pleasing design.
If you’re installing click vinyl in a room where there are two or more different types of wood floors, it’s a good idea to install the click vinyl on top of other floors because it is water-resistant and will help protect the wood from damage.
5) Installing click vinyl flooring
This is the easy part! Simply lay the plank (or planks) down and tap into place with your rubber mallet. You may need to use a straight edge in some cases if it’s difficult to get them completely aligned, but this should only happen on occasion. If you have any excess pieces that didn’t fit, you can cut them to size with a cutting mat and utility knife.
If you are looking for the perfect flooring to make your home look more stylish, click vinyl is the way to go. It’s easy to install and maintain, making it an ideal choice for any homeowner trying to add a touch of style without all the hassle. Get started today with one of the many beautiful designs that can transform your home into a beautiful, stylish living area.